Models & Specs - Xenon Gyroplanes Nth Qld Australia

Models & Specs - - Xenon Gyroplanes Australia

Xenon Gyroplanes

Dimensions	Cabin Width	1.2m
	Total Width	2.2m
	Total Lenght	4.9m
	Total Height	2.8m
	Wheel Diameter	400X4
Empty Weight	912s	275kg
	914	285kg
	912/rst	285kg
Max TO weight	Only tested to	600kg
Engine	Rotax 912S	100HP
	Rotax 914	115HP
	Rotax 912 RST	122HP
Fuel Capacity	2 connected tanks	88ltrs
Fuel Burn	@ 65% power	14-16 lts per hour**
Propeller 3 Blade	3 Blade DUC Windspoon	68.5inch
Pre-rotator	Mechanical	280-300 RRPM
Rotor	Aircopter Extruded Aluminium	Type 8H12
	Diameter	8.4 or 8.8m
Minimum Speed		15 knots
Maximum Speed	912S	95 knots
	914	95 knots
	912 RST	95 knots
Climb Rate		600-1200 fpm**
Glide Ratio		3/1
Service Ceiling		12000ft
Endurance		4 hours plus reserve
Take off Distance		10 to 150 mtrs
Landing Distance		0-10 mtrs

* The Xenon has only been tested to 600kgs which is as per ASRA regulations.
**Actual performance will vary depending upon altitude and atmospheric conditions.

About the engines and Turbos :

The Rotax 912 S is a 100 Horsepower engine with excellent performance.

The Rotax 914 has been a very popular engine for many years. The turbo on this engine only begins to work when you are at full throttle and it then boosts output from 100 to 115 HP. Turbo boost should not be used for more than 5 minutes.

The 912 RST model uses a smaller 80 HP Rotax 912 engine (smaller than the 100 HP 912S mentioned above). This engine has been fitted with a Mitsubishi Turbo that gives full time turbo boost. At full power this engine develops 122 Horsepower and is excellent for heavier loads or high altitudes.

Below are examples of the different colour possiblities.
It is factory advised how ever, to chose light colours for Austalian Climate.

Xenon Red

Below are examples of the 3 most popular seat cover colour possiblities :
Other colours and styles are available

Xenon Beige Seat

Below are floor carpet colour possiblities :

carpet dark grey

Zenogyro.com.au are also able to supply the Duc Helice Propellers to Australian customers

helice windspoon

Engine	type	Reducer	Recommended system	Blade diameter
3 TRACTIVE AXES
ROTAX 912	4 times	2.27	Two-bladed DUC FC RIGHT tractive	ø 1727
ROTAX 912 S	4 times	2.48	Three-bladed DUC FC RIGHT tractive	ø 1727
ROTAX 503 / 582	2 times	2.58 / 2.62 / 3	Two-bladed DUC FC LEFT tractive	ø 1727
ROTAX 503 / 582	2 times	3.47 / 4	Three-bladed DUC FCLEFT tractive	ø 1727
3 PROPULING AXES
ROTAX 912	4 times	2.27	Two-bladed DUC FC LEFT propelling	ø 1727
ROTAX 912 S	4 times	2.48	Three-bladed DUC FC LEFT propelling	ø 1727
ROTAX 503 / 582	2 times	2.58 / 2.62 / 3	Two-bladed DUC FC RIGHT propelling	ø 1727
ROTAX 503 / 582	2 times	3.47 / 4	Three-bladed DUC FC RIGHT ropelling	ø 1727
PENDULARS
ROTAX 912	4 times	2.27	Three-bladed DUC FC LEFT propelling	ø 1727
ROTAX 912 S	4 times	2.48	Three-bladed DUC FC LEFT propelling	ø 1727
ROTAX 503 / 582	2 times	2.58 / 2.62 / 3	Two-bladed DUC FC RIGHT propelling	ø 1727
ROTAX 503 / 582	2 times	3.47 / 4	Three-bladed DUC FC RIGHT propelling	ø 1727

Resources